Textile Mills & FibersTKT-1C82

Bangladesh wet processing uses 1,500bn litres of water a year

Bangladesh’s textile wet-processing sector uses about 1,500bn litres of water and 1.75m tons of chemicals a year, prompting calls for digital printing and low-water dyeing.

Cut
November 13, 2026
Sew
4 min
Ticket
TKT-1C82
Experts call for advanced dyeing technologies to reduce textile processing costs
Experts call for advanced dyeing technologies to reduce textile processing costsAI-generated

Construction

  1. Bangladesh’s textile wet-processing sector consumes approximately 1,500bn litres of water annually.

  2. Many local mills use 250–300 litres of water per kilogram of fabric, against global best practice of 50 litres or less.

  3. The sector consumes around 1.75m tons of chemicals annually, worth nearly $2bn.

  4. The World Bank says dyeing and printing contribute up to 20% of global industrial water pollution.

  5. Digital inkjet printing’s share of global printed textiles was projected to rise from 6% in 2019 to 10% by 2026.

By Olivia Hart

Bangladesh’s textile wet-processing sector consumes approximately 1,500 billion litres of water annually, while many local mills use 250–300 litres for each kilogram of fabric. The local range is at least five times the global best-practice benchmark of 50 litres or less.

Speakers at the Textile Innovation Expo 2026 called for that gap to narrow through low-water dyeing, digital printing and automated colour preparation. The technical seminar, “New Generation Dyeing & Printing Processes,” took place at Hall 08 in the Expo Village’s Innovation Demonstration Zone at the International Convention City Bashundhara in Dhaka.

It brought dyehouse managers, chemical innovators, academics and machinery suppliers into the same room. Two keynote speakers anchored the session: Md. Ashraful Alam, director of production (printing) at M.N. Dyeing, Printing & Washing Mills Ltd., and Dr Mohammad Abbas Uddin Shiyak, associate professor in the Department of Dyes and Chemical Engineering at Bangladesh University of Textiles.

Why does the water gap matter?

According to the World Bank, dyeing and printing contribute up to 20% of global industrial water pollution, a figure cited in the seminar. Bangladesh also consumes around 1.75 million tons of chemicals annually in this processing tier, a volume worth nearly $2 billion. That places water, energy and chemical reduction at the centre of factory economics, rather than treating them as separate environmental goals.

Alam addressed traditional printing, colour preparation, water use and automatic colour kitchens. He said automatic kitchens can save significant amounts of water and permit repeated reuse, while replacing inefficient manual preparation can reduce waste. The presentation gave no quantified saving or equipment-cost figure.

His conclusion linked production and environmental goals in one line. “We should move forward with innovation to reduce costs and environmental impact,” Alam said.

Which processes could replace conventional dyeing?

Shiyak addressed modern dyeing systems, water scarcity, circularity and what he described as conventional wet-processing paradoxes. His technical focus included polyester dyeing and low-liquor-ratio dyeing and printing, while his broader argument favoured deeper industry-academia collaboration. He also asked academic institutions to place emerging technologies higher in their discussions, helping factories prepare for sustainable growth.

Shiyak placed sensor-based machinery, real-time data and AI-driven chemical recipe formulation at the centre of the sector’s digital transformation. He described them as essential for future competitiveness.

Shiyak framed that transformation as a scientific reset. “We need a fundamental rethink about how we apply color, and to achieve this, we must truly understand the science of color,” he said.

No production-equipment orders, capacity additions or committed buyer-supplier contracts were disclosed at the event. The session presented technologies and recommendations, rather than signed commercial deals.

What did the wider panel add?

Engr A.S.M. Hafizur Rahman Nixon, secretary general of the Institution of Textile Engineers & Technologists, moderated the discussion. The panel included Engr Mohammad Selim Reza, managing director of Arien Knit Composite Ltd.; Engr Rezaul Karim (Reza), executive director of Ahsan Composite Ltd.; and Orion Wu, vice president of SEA at Tanatex Chemicals.

Speakers presented investment in advanced processing as a route to lower water, energy and chemical footprints, better right-first-time quality and shorter lead times. Those gains could also support buyers’ requirements for safer chemical management, they said. No specific certification, law or named buyer chemical programme was cited.

The market projection cited in the seminar put digital inkjet printing’s share of global printed textiles at 6% in 2019, with 10% projected for 2026. That trajectory gives digital lines, low-water and waterless dyeing, and automated colour kitchens greater relevance for factories competing in global print supply chains.

What should sourcing teams require next?

Sourcing and compliance teams should treat every environmental saving as a claim to trace, not a compliance result. Before accepting an equipment upgrade, they should require mills to provide process-level water, energy and chemical data, then map those results to the applicable law, certification or buyer chemical-management standard.

Without performance thresholds or named rules, buyers cannot treat the technologies as a verified compliance pathway. The event closed with Engr Ehsanul Karim Kaiser handing mementos to its guests. For sourcing teams, the decision is to evaluate each system against named requirements and actual mill data before accepting an upgrade as compliance.

via textiletoday.com.bd (Source)

Share this article:

More from Olivia Hart

Olivia Hart

Show full bio

Senior reporter covering regulation, policy and their impact on Light industry and softgoods manufacturing at Softgoods Report.

336 articles