Textile Mills & FibersTKT-D7D0

Terrot to demo 88-feeder jacquard knitter for premium mattress ticking

Terrot will show an 88-feeder UCC 672-ME electronic jacquard knitter at ITMA Asia + CITME 2026 in Shanghai, targeting premium mattress ticking and upholstery fabrics.

Cut
November 2, 2026
Sew
3 min
Ticket
TKT-D7D0
Terrot targets premium mattress fabrics
Terrot targets premium mattress fabricsstux / pixabay

Construction

  1. Terrot shows the UCC 672-ME at ITMA Asia + CITME 2026 in Shanghai, 20–24 November, stand H4.1 C39

  2. Configurations: 88 feeders at 38 inches (19 rpm) and 100 feeders at 42 inches (17 rpm)

  3. Illustrative daily output: 682–787 metres for mattress fabrics, 731 metres for upholstery, at 85% efficiency

  4. Three-way needle selection on cylinder and dial enables jacquard, 3D textures and reversible structures

  5. Handles cotton, polyester, viscose, Tencel, technical, recycled and bio-based yarns where processing permits

Terrot Textilmaschinen will show its UCC 672-ME double-electronic jacquard circular knitter at ITMA Asia + CITME 2026 in Shanghai, running a 38-inch, E20-gauge machine with 88 feeders aimed at premium mattress ticking, upholstery and technical textiles. The Chemnitz-based company, part of the Santoni China Group, will exhibit at stand H4.1 C39 during the show, which runs from 20 to 24 November.

What will the demonstration show?

The exhibition configuration will knit a specialised mattress fabric that incorporates cooling yarns, differentiated comfort zones and structures designed to promote ventilation on both fabric surfaces. For bedding suppliers, the point is that one fabric can combine supportive constructions with comfort-oriented designs rather than requiring separate layered solutions.

Terrot is careful to frame the performance claim correctly: actual cooling and breathability depend on yarn selection, fabric engineering and finishing. The machine itself controls structure; the thermal properties come from the yarn and the finishing route.

How does three-way selection change production?

The mechanism sits in the electronics. The UCC 672-ME offers independently programmable three-way needle selection on both cylinder and dial, so manufacturers can control knit, tuck and miss actions at every feeder. That combination produces intricate jacquard patterns, three-dimensional textures, ventilation zones and reversible structures without the limits of mechanical patterning systems.

"For premium fabric manufacturers, differentiation begins with control over the structure of the fabric itself," said Martin Vorsatz, Managing Director of Terrot Textilmaschinen. "The UCC 672-ME's three-way selection on both cylinder and dial gives customers the freedom to develop complex designs on both sides of the fabric while retaining a clear focus on industrial production requirements."

What are the capacity numbers?

The machine comes in diameters from 34 to 42 inches, with two main configurations: 88 feeders at 38 inches and 100 feeders at 42 inches. Maximum operating speeds run at 19 rpm and 17 rpm respectively.

Terrot's technical documentation cites illustrative daily outputs of approximately 682–787 metres for mattress fabrics and 731 metres for upholstery. Those figures assume a 38-inch E20 machine running at 19 rpm and 85% efficiency; actual output depends on fabric construction and operating conditions.

Changeover engineering matters as much as speed for sample-driven mills. A divided dial cam system allows needle changes without completely removing the selection units. Switching between knit and tuck structures needs no replacement components, which shortens development and changeover times. The machine also carries integrated yarn guidance for long floating threads and take-down configurations for fabric widths up to 1,708 mm. Terrot's Paint pattern and design software links digital pattern preparation directly to machine production.

Which end uses and yarns qualify?

Beyond mattress ticking, the platform targets upholstery textiles, spacer fabrics, footwear uppers and selected outerwear applications. The machine can process appropriately specified cotton, polyester, viscose, Tencel and technical yarns, with recycled and bio-based fibres offering possibilities where processing characteristics permit.

Michael Lau, Head of Research & Development, said flexible patterning, efficient changeovers and a broad application range could strengthen the investment case when aligned with manufacturers' target markets and production requirements. Thomas Fischer, Head of Application Advisory, stressed the need to test new fabric structures using customers' own yarns and production conditions before drawing conclusions on quality, process stability and commercial viability.

The Shanghai presentation sits within the wider Santoni China Group strategy, "Machines Evolved · Intelligence Delivered", which combines mechanical engineering, material expertise and digital tools for integrated textile manufacturing. Terrot claims more than 160 years of engineering heritage in circular knitting.

What should buyers do before Shanghai?

Mills weighing the UCC 672-ME should bring their own yarn specifications and target fabric constructions to the stand, following Fischer's advice on validation. Buyers serving the premium mattress and upholstery tiers need to confirm that the illustrative 682–787 metre daily output holds under their own constructions, and decide whether double-sided electronic selection justifies the capital cost against mechanical jacquard alternatives.

via terrot.de (Original)

Share this article:

More from Grace Kim

Grace Kim

Show full bio

Correspondent covering regulation, policy and their impact on Light industry and softgoods manufacturing at Softgoods Report.

381 articles